Skip to main content
  The Houston Canoe Club
Share our Joy of Paddling!








P.O. Box 925516
Houston, Texas
77292-5516



The Houston Canoe Club 

is a Paddle America Club


Link to ACA

Add Me To Your Mailing List
HomeNL-2010-09_Extreme_One_Voyageur
EXTREMES
By Skip Johnson


 
  The Voyageur
  (Click thumbnail photos to see full-screen versions.)
   
I’ve been remiss in writing for a while, been busy, but the lead photo of the Voyageur crossing Lake Laberge in the 2010 Yukon River Quest (right) got me to thinking about extremes (for some reason).

If you mess around with designing and building canoes for a while, some racers are going to cross your path. The Voyageur is an enormous boat, toward the extreme edge of what could reasonably be called a canoe. At the other end of the spectrum for some Girl Scouts in Arizona is a slick little cardboard canoe most appropriately named the “Cookie Monster”. What follows is an edited account of an article on the Voyageur after the 2007 record setting first race (they won this year also, but not quite as quickly).

I’ll follow up next month with some comments on the Cookie Monster.

The Design

When Richard Ameen approached me about designing a Voyageur for the Yukon River Quest, the only question was, “how many paddlers are you going to have?” Once the governing body finalized the rules, we had a choice of 3 sizes within the class:
    (A) 28’ LOA, 36” minimum beam at the 6” waterline
    (B) 34’ LOA, 44” minimum beam at the 6” waterline
    (C) 42’ LOA, 48” minimum beam at the 6” waterline
In each case the boat had to be a minimum of 18 inches deep at the gunnels, 6 man minimum, single blade paddles.

Preliminary calculations ran out that the 28’ boat wanted a 6 man crew, the 34’ boat an 8 man crew and the 42’ boat 14 paddlers.

The biggest size was dropped from consideration, too many people involved, the other two sizes have virtually identical L/B ratios (9.33 and 9.27) so the decision was based on the number of premier paddlers Richard could recruit for the effort. Eight it is. Based on previous ruminations with Safari boats, the paddlers equivalent to the drag racers “there’s no substitute for cubic inches” holds true but there is diminishing returns as you add paddlers past 5 or 6. Still a 34-foot long boat should be better/quicker than 28 footer. Particularly since there are no portages or really twisty narrow spots.

Weight estimates and fixed dimensions in hand, preliminary design is pretty straightforward. 6” by 44” midsection times about .8 gives a midsection of 1.47 square feet times a length of 34 feet with a prismatic coefficient of 0.50 equals 24.93 cubic feet or 1556 fresh water pounds. Dead on, just less than 200#/paddler which is a little conservative, since these guys don’t carry any extra weight on their persons.

To squeeze the last little bit of drag out of the boat a number of Godzilla optimization routines were run through Mitchlet to fine tune the shape below the waterline. A graph of relative drag is included for those interested in the fiddling
   
 
  Relative drag
details. The graph compared the drag versus speed for a single paddler in four different boats. The 2 man shallow water data was included just because it was handy and adds a little perspective to the forces involved. The cyan ‘base’ curve is a non optimized but generally well-shaped 8-man voyageur (preliminary design). Yellow curve is the optimized shape for the same boat. The brown curve for a paddler in a 6 man safari style boat shows the difference a little beam makes. Up to about the 24th tick on the speed scale, (about 6 mph) The Voyageur has an advantage based on relatively smaller wetted surface. Then the smaller cross section of the Safari boat makes less waves and will pull away from the voyageurs if all the paddlers are putting out a constant force of 0.02 kilo-newtons.

Please take all this with a large grain of salt. The graph is a reasonable reflection of reality but doesn’t take into consideration our theoretical paddlers training, heredity or heart, which will trump any increase or decrease in area under a graph. Still its good to give these paddlers the best boat possible.

Once the underwater shape is fixed it is time to shape the topsides which is primarily adding some tumblehome to the center of the boat and flaring out a ‘sterncastle’ in the stern to get the steersman paddler as far aft as possible. In this case there is enough depth in the bow to decide that no extra bumps or flares are needed for extra volume. In this particular case I did the tumblehome section three times.

First time I rolled the sections to a parallel line on the basis that it would be the easiest for George to cut out all those patterns. George is something of a perfectionist, and thought the boat would be better if it didn’t have that ‘hard spot’ where the sections transitioned from natural to rolled. The sections were redone in that area and stripping started. Still doesn’t look quite right… Finally I redo the sections the way they should have been done in the first place and building commences.

The Build

Once the outer skin has cured, the boat is taken off the form and prepped for the inside laminate Kevlar, carbon fiber and a touch of s-glass each side of 3/8” (9mm) 5#/cubic foot divinylcell foam. Foam is stripped over male form much like a conventional stripper. Outer skin is laid up, carbon fiber followed by s-glass and smoothed up with a layer of peel ply. A large crew is required for layup operation, in the picture left to right: Richard Ameen, Wade Binion, John Hoffart, George Melder, all team members and Gary Kohut on far side of boat. Present but not in picture, John Qualls, team member and yours truly who usually shows up and mixes epoxy at these events.


George with boat

Outside laminate










Once the outer skin has cured, the boat is taken off the form and prepped for the inside laminate If anything inside laminate a little more frenzied process than the outer, witness no one took any good pictures but I believe there were 8 of us. The interior laminate is vacuum bagged which entails adding a couple of layers of bleeder cloth and absorption material over laminate and then wrapping the whole boat in a nylon bag and applying a vacuum (5-7 psi) to consolidate the laminate and remove any excess resin.

Then inside laminate applied, kevlar, and a blend of carbon/s-glass.


Inside laminate (1)

Inside laminate (2)


Vacuum

















At this point the hull is done except for some trim work, gunnel reinforcing and the like. I was of the opinion that the boat needed to have a couple of bulkheads in the middle of the boat (like the plans showed) to stiffen the hull and keep the gunnels from panting (moving in and out). Turned out that with the seat braces in place, no matter how hard you pushed and pulled, the gunnels just stayed in place. Amazing stiffness with all that carbon fiber.

Rigging

In many respects a voyageur is simpler than a safari boat, light requirements are minimal, it is after all going to race in the land of the midnight sun. Gear requirements are different but there is an enormous amount of room available, particularly compared to a safari boat. The big question regarding rigging was the seating setup. All the crew had read an outstanding article by one of last years top voyageur finishers and the description of switching from side to side on bench seats was a matter of some concern. These guys hate to miss a single stroke and the thought of missing several strokes while clambering around every 50 or so strokes was the stuff of nightmares. George asked me if I thought that there was room to have everybody in a line and after a quick check, the answer was yes, actually there was plenty of room. Then George had a brilliant idea, make the center seats slide from side to side, so its quicker and easier to swap sides, and by the way not miss a stroke… ever. The
 
  Sliding seats
lateral sliding seats used in the center 4 positions were elegantly executed using hardware for an exercise rowing machine Since this was a new innovation, the boys asked me to hold off writing anything about the boat until they actually raced it. A reasonable request, actually they paddle faster than I write and now have won the 2007 Yukon River Quest in a record time 41 hrs 15 min unofficially, one hour one minute ahead of the second place boat. The lateral sliding seats may have helped, but they won with teamwork and heart. Interestingly, initial trials brought to light one aspect of the lateral sliding seats no one had considered beforehand. If you miss hearing the call to hut (switch), the boat will heel to your side when there are suddenly 3 people on one side and only one on the other. Then is a long way uphill to slide to get to the proper side. Apparently every one learns this quickly and it is not a problem. Do note though that the one time this designer was in the boat, I’m in one of the fixed seats.


First trial run

2nd trial run









Last Practice

Susie had allowed that she hadn’t seen the new boat and would like to see it in the water before it left for points north. We went up to Lake Conroe and watched the last practice, which included all the Texas team members plus a couple of good local paddlers to fill in for the two team members from the Northwest. Pictures and captions follow.


Arrival - That's a full-size pickup.

Half the crew can easily move the boat.



Leaving: Wade, John, Pete, John, Grady, Richard, John and George



Leaving (2)














Leaving (2): About 3 boat lengths and they are up to speed; probably exceeding the marina speed limit but not leaving a wake. Note that everyone except Grady has changed position and was surely done without slowing down.


Returning

Loading: Off to the Yukon








Postscript

A new voyageur record, the first time a voyageur had won first place, beating two local favorites that expected to win the race, heady accomplishments for a team that hadn’t been there before.

Kudos to:
  • Richard Ameen, who put it all together
  • George Melder, builder extraordinary
  • The two Johns, Qualls and Hoffart
  • Pete and Wade Binion, father and son
    (Pete did a paddlers trifecta this year, 1st masters-Ruta Maya, 1ST TWS, 1st YRQ)
  • Edoh Amiran, navigator extraordinary
  • Liam Price, steersman
I’m honored to have helped in a small way.

Photo courtesy of YukonRiverQuest.com:


2007 Winners!




The author, Skip Johnson